Skip main navigation
You are at: Home>Standards and Books>Standard finder
Refine your search
Standards
Status
Language

Standard finder

Standard finder

Results for:

Number of results 488

UNE 149201:2017  UNE

Status: In force / 2017-05-03

Water supply. Sizing of installations inside buildings conveying water.

CTN 149/SC 2 WATER SUPPLY

UNE 149101:2015  UNE

Status: In force / 2015-01-21

Water conditioning equipment inside buildings. Validation of equipment used in the treatment of drinking water in the interior of buildings.

CTN 149 WATER ENGINEERING

UNE-CEN/TR 16355:2014 IN  UNE

Status: In force / 2014-09-10

Recommendations for prevention of Legionella growth in installations inside buildings conveying water for human consumption

CTN 149 WATER ENGINEERING

UNE-EN 13618:2017  UNE

Status: In force / 2017-05-31

Flexible hose assemblies in drinking water installations - Functional requirements and test methods

CTN 53/SC 1 ELASTOMERS

UNE-EN 12201-2:2012+A1:2014  UNE

Status: In force / 2017-03-01

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN 1074-2/A1:2004  UNE

Status: In force / 2015-06-25

Valves for water supply - Fitness for purpose requirements and appropriate verification test - Part 2: Isolating valves

CTN 19 CAST IRON PIPES, METALLIC TAPWARE, VALVES AND FITTINGS

UNE-CEN/TR 12108:2015 IN  UNE

Status: In force / 2015-01-14

Plastics piping systems - Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE 149202:2013  UNE

Status: In force / 2013-07-10

Water supply. Water system intended for human consumption inside buildings. Pressure equipment.

CTN 149/SC 2 WATER SUPPLY

UNE-EN 1717:2001  UNE

Status: In force / 2011-06-29

PROTECTION AGAINST POLLUTION OF POTABLE WATER IN WATER INSTALLATIONS AND GENERAL REQUIREMENTS OF DEVICES TO PREVENT POLLUTION BY BACKFLOW.

CTN 149 WATER ENGINEERING

UNE-EN 12502-1:2005  UNE

Status: In force / 2019-01-01

Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General

CTN 112 CORROSION AND PROTECTION AGAINST CORROSION OF METALLIC MATERIALS

UNE-EN 1074-1:2001  UNE

Status: In force / 2015-06-25

Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements.

CTN 19 CAST IRON PIPES, METALLIC TAPWARE, VALVES AND FITTINGS

UNE-EN 1074-2:2001  UNE

Status: In force / 2015-06-25

Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves.

CTN 19 CAST IRON PIPES, METALLIC TAPWARE, VALVES AND FITTINGS

UNE-EN 12502-3:2005  UNE

Status: In force / 2015-01-01

Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 3: Influencing factors for hot dip galvanised ferrous materials

CTN 112 CORROSION AND PROTECTION AGAINST CORROSION OF METALLIC MATERIALS

UNE-EN 12201-3:2012+A1:2013  UNE

Status: In force / 2013-06-05

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN 806-5:2013  UNE

Status: In force / 2017-09-19

Specifications for installations inside buildings conveying water for human consumption - Part 5: Operation and maintenance

CTN 149 WATER ENGINEERING

UNE-EN 1074-1:2001 ERRATUM:2008  UNE

Status: In force / 2015-06-25

Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements.

CTN 19 CAST IRON PIPES, METALLIC TAPWARE, VALVES AND FITTINGS

UNE-EN 1487:2015  UNE

Status: In force / 2015-04-29

Building valves - Hydraulic safety groups - Tests and requirements

CTN 19 CAST IRON PIPES, METALLIC TAPWARE, VALVES AND FITTINGS

UNE-EN 12502-2:2005  UNE

Status: In force / 2015-01-01

Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 2: Influencing factors for copper and copper alloys

CTN 112 CORROSION AND PROTECTION AGAINST CORROSION OF METALLIC MATERIALS

UNE-EN 12502-5:2005  UNE

Status: In force / 2015-01-01

Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron, unalloyed and low alloyed steels

CTN 112 CORROSION AND PROTECTION AGAINST CORROSION OF METALLIC MATERIALS

UNE-EN 806-2:2005  UNE

Status: In force / 2014-01-01

Specification for installations inside buildings conveying water for human consumption - Part 2: Design

CTN 149 WATER ENGINEERING

UNE-CEN/TS 14632:2013 EX  UNE

Status: In force / 2013-04-30

Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 22391-2:2010  UNE

Status: In force / 2010-10-13

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes (ISO 22391-2:2009)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 1452-2:2010  UNE

Status: In force / 2010-09-15

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes (ISO 1452-2:2009)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 21003-5:2009  UNE

Status: In force / 2009-01-14

Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system (ISO 21003-5:2008)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 15875-2:2004  UNE

Status: In force / 2008-10-15

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO 15875-2:2003)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN 806-3:2007  UNE

Status: In force / 2007-01-03

Specifications for installations inside buildings conveying water for human consumption - Part 3: Pipe sizing - Simplified method

CTN 149 WATER ENGINEERING

UNE-EN 640:1995  UNE

Status: In force / 2019-06-13

Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings

CTN 149 WATER ENGINEERING

UNE-EN 641:1995  UNE

Status: In force / 2019-06-13

Reinforced concrete pressure pipes, cylinder type, including joints and fittings

CTN 149 WATER ENGINEERING

UNE-EN 12897:2017  UNE

Status: In force / 2017-05-24

Water supply - Specification for indirectly heated unvented (closed) storage water heaters

CTN 149 WATER ENGINEERING

UNE-EN 13443-2:2005+A1:2008  UNE

Status: In force / 2016-03-16

Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 µm to less than 80 µm - Requirements for performance, safety and testing

CTN 149 WATER ENGINEERING

UNE-EN 12502-4:2005  UNE

Status: In force / 2015-01-01

Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels

CTN 112 CORROSION AND PROTECTION AGAINST CORROSION OF METALLIC MATERIALS

UNE-CEN/TS 12201-7:2014  UNE

Status: In force / 2014-12-01

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity (Endorsed by AENOR in December of 2014.)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN 13831:2008  UNE

Status: In force / 2014-06-03

Closed expansion vessels with built in diaphragm for installation in water

CTN 62/SC 1 PRESSURE EQUIPMENT WITHOUT EXTERNAL HEAT SUPPLY

UNE-EN 1508:1999  UNE

Status: In force / 2014-05-21

WATER SUPPLY - REQUIREMENTS FOR SYSTEMS AND COMPONENTS FOR THE STORAGE OF WATER

CTN 149 WATER ENGINEERING

UNE-EN 806-1:2001  UNE

Status: In force / 2014-01-01

Specifications for installations inside buildings conveying water for human consumption - Part 1: General.

CTN 149 WATER ENGINEERING

UNE-EN 806-1/A1:2002  UNE

Status: In force / 2014-01-01

Specifications for installations inside buildings coveying water for human consumption. Part 1: General.

CTN 149 WATER ENGINEERING

UNE-EN 12201-1:2012  UNE

Status: In force / 2012-05-03

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 21003-2:2009/A1:2011  UNE

Status: In force / 2011-12-28

Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes - Amendment 1 (ISO 21003-2:2008/Amd 1:2011)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN 806-4:2010  UNE

Status: In force / 2010-10-27

Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation

CTN 149 WATER ENGINEERING

UNE-EN ISO 22391-1:2010  UNE

Status: In force / 2010-10-13

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General (ISO 22391-1:2009)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 1452-1:2010  UNE

Status: In force / 2010-09-15

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 21003-1:2009 ERRATUM:2009  UNE

Status: In force / 2009-02-04

Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 21003-2:2009 ERRATUM:2009  UNE

Status: In force / 2009-02-04

Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 21003-3:2009 ERRATUM:2009  UNE

Status: In force / 2009-02-04

Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 21003-5:2009 ERRATUM:2009  UNE

Status: In force / 2009-02-04

Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system (ISO 21003-5:2008)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 21003-1:2009  UNE

Status: In force / 2009-01-14

Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 21003-2:2009  UNE

Status: In force / 2009-01-14

Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 21003-3:2009  UNE

Status: In force / 2009-01-14

Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 15875-5:2004  UNE

Status: In force / 2008-10-15

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 15875-1:2004  UNE

Status: In force / 2008-10-15

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO 15875-1:2003)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

Number of results 488