Skip main navigation
You are at: Home>Standards and Books>Standard finder
Refine your search
Standards
Status
Language

Standard finder

Standard finder

Results for:

Number of results 473

UNE-EN 10346:2015  UNE

Status: In force / 2015-10-14

Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions

CTN 36 IRON AND STEEL

UNE-EN 10025-2:2006  UNE

Status: In force / 2019-01-01

Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels

CTN 36 IRON AND STEEL

UNE-EN 10025-2:2006 ERRATUM:2012  UNE

Status: In force / 2019-01-01

Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels

CTN 36 IRON AND STEEL

UNE-EN 10152:2017  UNE

Status: In force / 2017-07-26

Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions

CTN 36 IRON AND STEEL

UNE-EN 10025-1:2006  UNE

Status: In force / 2006-02-08

Hot rolled products of structural steels - Part 1: General technical delivery conditions

CTN 36 IRON AND STEEL

UNE-EN 10139:2016  UNE

Status: In force / 2016-10-11

Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions

CTN 36 IRON AND STEEL

UNE-EN 10029:2011  UNE

Status: In force / 2015-09-16

Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape

CTN 36 IRON AND STEEL

UNE-EN 10143:2007  UNE

Status: In force / 2007-10-31

Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape

CTN 36 IRON AND STEEL

UNE-EN 10028-7:2016  UNE

Status: In force / 2016-12-28

Flat products made of steels for pressure purposes - Part 7: Stainless steels

CTN 36 IRON AND STEEL

UNE-EN 10051:2012  UNE

Status: In force / 2015-03-17

Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape

CTN 36 IRON AND STEEL

UNE-EN 10163-2:2007  UNE

Status: In force / 2014-02-05

Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats

CTN 36 IRON AND STEEL

UNE-EN 10088-3:2015  UNE

Status: In force / 2015-03-18

Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

CTN 36 IRON AND STEEL

UNE-EN 10088-2:2015  UNE

Status: In force / 2015-03-18

Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes

CTN 36 IRON AND STEEL

UNE 135314:2017  UNE

Status: In force / 2017-09-13

Vertical signs. Galvanized steel profiles used as post of the signs, side posters and directional signs. Moving supporting elements. Screw products. Characteristics and test methods.

CTN 135 ROAD SIGNALISATION EQUIPMENT

UNE-EN 10163-1:2007/AC:2007  UNE

Status: In force / 2009-09-09

Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements

CTN 36 IRON AND STEEL

UNE-EN 10028-1:2017  UNE

Status: In force / 2017-12-05

Flat products made of steels for pressure purposes - Part 1: General requirements

CTN 36 IRON AND STEEL

UNE 135320:2017  UNE

Status: In force / 2017-09-13

Vertical signs. Slat galvanized steel sheet. Type A and B. Characteristics and test methods.

CTN 135 ROAD SIGNALISATION EQUIPMENT

UNE-EN 10130:2008  UNE

Status: In force / 2017-07-13

Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions

CTN 36 IRON AND STEEL

UNE-EN 10163-1:2007  UNE

Status: In force / 2014-02-05

Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements

CTN 36 IRON AND STEEL

UNE-EN ISO 9445-2:2011  UNE

Status: In force / 2011-11-08

Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and plate/sheet (ISO 9445-2:2009)

CTN 36 IRON AND STEEL

UNE-EN 10028-2:2017  UNE

Status: In force / 2017-12-05

Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties

CTN 36 IRON AND STEEL

UNE-EN 10028-3:2017  UNE

Status: In force / 2017-12-05

Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized

CTN 36 IRON AND STEEL

UNE-EN 10132-2:2001  UNE

Status: In force / 2016-01-25

COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT. TECHNICAL DELIVERY CONDITIONS. PART 2: CASE HARDENING STEELS.

CTN 36 IRON AND STEEL

UNE-EN 10149-2:2014  UNE

Status: In force / 2014-06-11

Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels

CTN 36 IRON AND STEEL

UNE-EN ISO 9445-1:2011  UNE

Status: In force / 2011-11-08

Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths (ISO 9445-1:2009)

CTN 36 IRON AND STEEL

UNE-EN 10363:2016  UNE

Status: In force / 2016-12-21

Continuously hot-rolled patterned steel strip and plate/sheet cut from wide strip - Tolerances on dimensions and shape

CTN 36 IRON AND STEEL

UNE-EN 10132-1:2001  UNE

Status: In force / 2016-01-25

COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT. TECHNICAL DELIVERY CONDITIONS. PART 1: GENERAL.

CTN 36 IRON AND STEEL

UNE-EN 10111:2009  UNE

Status: In force / 2014-01-01

Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions

CTN 36 IRON AND STEEL

UNE-EN 10268:2007+A1:2013  UNE

Status: In force / 2013-12-18

Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions

CTN 36 IRON AND STEEL

UNE-EN 10025-6:2007+A1:2009  UNE

Status: In force / 2009-12-16

Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

CTN 36 IRON AND STEEL

UNE-EN 10140:2007  UNE

Status: In force / 2007-06-13

Cold rolled narrow steel strip - Tolerances on dimensions and shape

CTN 36 IRON AND STEEL

UNE-EN 10169:2011+A1:2012  UNE

Status: In force / 2012-06-06

Continuously organic coated (coil coated) steel flat products - Technical delivery conditions

CTN 36 IRON AND STEEL

UNE-EN 10028-6:2017  UNE

Status: In force / 2017-12-05

Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered

CTN 36 IRON AND STEEL

UNE-EN 10028-5:2017  UNE

Status: In force / 2017-12-05

Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled

CTN 36 IRON AND STEEL

UNE-EN 10028-4:2017  UNE

Status: In force / 2017-12-05

Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties

CTN 36 IRON AND STEEL

UNE-EN ISO 10113:2014  UNE

Status: In force / 2014-12-23

Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO 10113:2006, Corrected version 2007-08-01)

CTN 7 TESTING OF MATERIALS

UNE-EN ISO 10275:2014  UNE

Status: In force / 2014-12-23

Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent (ISO 10275:2007)

CTN 7 TESTING OF MATERIALS

UNE-EN 10160:2000  UNE

Status: In force / 2014-08-26

ULTRASONIC TESTING OF STEEL FLAT PRODUCT OF THICKNESS EQUAL OR GREATER THAN 6 MM (REFLECTION METHOD).

CTN 36 IRON AND STEEL

UNE-EN ISO 9444-2:2011  UNE

Status: In force / 2011-11-08

Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate (ISO 9444-2:2009)

CTN 36 IRON AND STEEL

UNE-EN 10025-3:2006  UNE

Status: In force / 2006-10-11

Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

CTN 36 IRON AND STEEL

UNE-EN 10120:2018  UNE

Status: In force / 2018-01-03

Steel sheet and strip for welded gas cylinders

CTN 36 IRON AND STEEL

UNE-EN 10106:2016  UNE

Status: In force / 2016-03-02

Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state

CTN 36 IRON AND STEEL

UNE-EN 10132-4:2001  UNE

Status: In force / 2016-01-25

COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT. TECHNICAL DELIVERY CONDITIONS. PART 4: SPRING STEELS AND OTHER APPLICATIONS.

CTN 36 IRON AND STEEL

UNE-EN 10132-3:2001  UNE

Status: In force / 2016-01-25

COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT. TECHNICAL DELIVERY CONDITIONS. PART 3: STEELS FOR QUENCHING AND TEMPERING.

CTN 36 IRON AND STEEL

UNE-EN 10107:2014  UNE

Status: In force / 2014-09-24

Grain-oriented electrical steel strip and sheet delivered in the fully processed state

CTN 36 IRON AND STEEL

UNE-EN 10149-1:2014  UNE

Status: In force / 2014-06-11

Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions

CTN 36 IRON AND STEEL

UNE-EN 10048:1997  UNE

Status: In force / 2014-01-01

HOT ROLLED NARROW STEEL STRIP. TOLERANCES ON DIMENSIONS AND SHAPE.

CTN 36 IRON AND STEEL

UNE-EN 10131:2007  UNE

Status: In force / 2007-10-31

Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape

CTN 36 IRON AND STEEL

UNE-EN 10025-5:2007  UNE

Status: In force / 2007-02-21

Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

CTN 36 IRON AND STEEL

UNE 135337:2013  UNE

Status: In force / 2013-05-22

Vertical signs. Metallic signs and directional panels. Packing, storage, manipulation, transport and installation. Materials. Characteristics and test methods.

CTN 135 ROAD SIGNALISATION EQUIPMENT

Number of results 473