Skip main navigation
You are at: Home>Standards and Books>Standard finder
Refine your search
Standards
Status
Language

Standard finder

Standard finder

Results for:

Number of results 88

UNE-EN IEC 62966-1:2019  UNE

Status: In force / 2019-06-01

Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 1: Dimensions and mechanical requirements (Endorsed by Asociación Española de Normalización in June of 2019.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN IEC 60286-3:2019  UNE

Status: In force / 2019-04-01

Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes (Endorsed by Asociación Española de Normalización in April of 2019.)

CTN 209/SC 40 CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT

UNE-EN IEC 61191-1:2018  UNE

Status: In force / 2018-12-01

Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies (Endorsed by Asociación Española de Normalización in December of 2018.)

CTN 203/SC 91-119 ELECTRONICS ASSEMBLY TECHNOLOGY AND PRINTED ELECTRONICS

UNE-EN IEC 60297-3-110:2018  UNE

Status: In force / 2018-12-01

Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-110: Residential racks and cabinets for smart houses (Endorsed by Asociación Española de Normalización in December of 2018.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN IEC 62610-2:2018  UNE

Status: In force / 2018-08-01

Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling (Endorsed by Asociación Española de Normalización in August of 2018.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 60286-1:2017  UNE

Status: In force / 2017-12-01

Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes (Endorsed by Asociación Española de Normalización in December of 2017.)

CTN 209/SC 40 CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT

UNE-EN 61191-4:2017  UNE

Status: In force / 2017-12-01

Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies (Endorsed by Asociación Española de Normalización in December of 2017.)

CTN 203/SC 91-119 ELECTRONICS ASSEMBLY TECHNOLOGY AND PRINTED ELECTRONICS

UNE-EN 61191-2:2017  UNE

Status: In force / 2017-11-01

Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies (Endorsed by Asociación Española de Normalización in November of 2017.)

CTN 203/SC 91-119 ELECTRONICS ASSEMBLY TECHNOLOGY AND PRINTED ELECTRONICS

UNE-EN 61191-3:2017  UNE

Status: In force / 2017-10-01

Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies (Endorsed by Asociación Española de Normalización in October of 2017.)

CTN 203/SC 91-119 ELECTRONICS ASSEMBLY TECHNOLOGY AND PRINTED ELECTRONICS

UNE-EN 61587-6:2017  UNE

Status: In force / 2017-09-01

Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6: Security aspects for indoor cabinets (Endorsed by Asociación Española de Normalización in September of 2017.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 61587-1:2017  UNE

Status: In force / 2017-06-01

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation (Endorsed by Asociación Española de Normalización in June of 2017.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 62739-3:2017  UNE

Status: In force / 2017-05-01

Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 3: Selection guidance of erosion test methods (Endorsed by Asociación Española de Normalización in May of 2017.)

CTN 203/SC 91-119 ELECTRONICS ASSEMBLY TECHNOLOGY AND PRINTED ELECTRONICS

UNE-EN 62739-2:2016  UNE

Status: In force / 2016-11-01

Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 2: Erosion test method for metal materials with surface processing (Endorsed by AENOR in November of 2016.)

CTN 203/SC 91-119 ELECTRONICS ASSEMBLY TECHNOLOGY AND PRINTED ELECTRONICS

UNE-EN 62610-5:2016  UNE

Status: In force / 2016-08-01

Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 5: Cooling performance evaluation for indoor cabinets (Endorsed by AENOR in August of 2016.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 60297-3-109:2016  UNE

Status: In force / 2016-03-01

Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-109: Dimensions of chassis for embedded computing devices (Endorsed by AENOR in March of 2016.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 60286-2:2015  UNE

Status: In force / 2015-07-01

Packaging of components for automatic handling - Part 2: Packaging of components with unidirectional leads on continuous tapes (Endorsed by AENOR in July of 2015.)

CTN 209/SC 40 CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT

UNE-EN 60297-3-108:2015  UNE

Status: In force / 2015-02-01

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-108: Dimensions of R-type subracks and plug-in units (Endorsed by AENOR in February of 2015.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 61587-5:2014  UNE

Status: In force / 2014-05-01

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5: Seismic tests for chassis, subracks and plug-in units (Endorsed by AENOR in May of 2014.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 62610-4:2013  UNE

Status: In force / 2014-01-01

Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 4: Cooling performance tests for water supplied heat exchangers in electronic cabinets (Endorsed by AENOR in January of 2014.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 60286-4:2013  UNE

Status: In force / 2014-01-01

Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms (Endorsed by AENOR in January of 2014.)

CTN 209/SC 40 CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT

UNE-EN 61191-2:2013  UNE

Status: In force / 2013-11-01

Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies (Endorsed by AENOR in November of 2013.)

CTN 203/SC 91-119 ELECTRONICS ASSEMBLY TECHNOLOGY AND PRINTED ELECTRONICS

UNE-EN 61191-1:2013  UNE

Status: In force / 2013-10-01

Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies (Endorsed by AENOR in October of 2013.)

CTN 203/SC 91-119 ELECTRONICS ASSEMBLY TECHNOLOGY AND PRINTED ELECTRONICS

UNE-EN 62739-1:2013  UNE

Status: In force / 2013-10-01

Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 1: Erosion test method for metal materials without surface processing (Endorsed by AENOR in October of 2013.)

CTN 203/SC 91-119 ELECTRONICS ASSEMBLY TECHNOLOGY AND PRINTED ELECTRONICS

UNE-EN 60286-3:2013  UNE

Status: In force / 2013-09-01

Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes (Endorsed by AENOR in September of 2013.)

CTN 209/SC 40 CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT

UNE-EN 61587-3:2013  UNE

Status: In force / 2013-06-01

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets and subracks (Endorsed by AENOR in June of 2013.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 60917-2-5:2012  UNE

Status: In force / 2012-11-01

Modular order for the development of mechanical structures for electronic equipment practices - Part 2-5: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Cabinet interface dimensions for miscellaneous equipment (Endorsed by AENOR in November of 2012.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 61587-4:2012  UNE

Status: In force / 2012-11-01

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 4: Combination of performance levels for modular cabinets (Endorsed by AENOR in November of 2012.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 61587-1:2012  UNE

Status: In force / 2012-06-01

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor conditions (Endorsed by AENOR in June of 2012.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 60297-3-107:2012  UNE

Status: In force / 2012-06-01

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-107: Dimensions of subracks and plug-in units, small form factor (Endorsed by AENOR in June of 2012.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 61969-1:2012  UNE

Status: In force / 2012-04-01

Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines (Endorsed by AENOR in April of 2012.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 61969-2:2012  UNE

Status: In force / 2012-04-01

Mechanical structures for electronic equipment - Outdoor enclosures - Part 2: Coordination dimensions (Endorsed by AENOR in April of 2012.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 61969-3:2012  UNE

Status: In force / 2012-04-01

Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects (Endorsed by AENOR in April of 2012.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 61587-2:2011  UNE

Status: In force / 2012-02-01

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 2: Seismic tests for cabinets and racks (Endorsed by AENOR in February of 2012.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 61760-3:2010  UNE

Status: In force / 2010-09-01

Surface mounting technology -- Part 3: Standard method for the specification of components for Through Hole Reflow (THR) soldering (Endorsed by AENOR in September of 2010.)

CTN 203/SC 91-119 ELECTRONICS ASSEMBLY TECHNOLOGY AND PRINTED ELECTRONICS

UNE-EN 60297-3-106:2010  UNE

Status: In force / 2010-07-01

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1 (Endorsed by AENOR in July of 2010.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 60917-2-4:2010  UNE

Status: In force / 2010-07-01

Modular order for the development of mechanical structures for electronic equipment practices -- Part 2-4: Sectional specification - Interface coordination dimensions for the 25 mm equipment practice - Adaptation dimensions for subracks or chassis applicable in cabinets or racks in accordance with IEC 60297-3-100 (19 in) (Endorsed by AENOR in July of 2010.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 60297-3-105:2009  UNE

Status: In force / 2009-03-01

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-105: Dimensions and design aspects for 1U high chassis (Endorsed by AENOR in March of 2009.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 60297-3-100:2009  UNE

Status: In force / 2009-03-01

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets (Endorsed by AENOR in March of 2009.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 61760-1:2006  UNE

Status: In force / 2006-09-01

Surface mounting technology -- Part 1: Standard method for the specification of surface mounting components (SMDs) (IEC 61760-1:2006) (Endorsed by AENOR in September of 2006.)

CTN 203/SC 91-119 ELECTRONICS ASSEMBLY TECHNOLOGY AND PRINTED ELECTRONICS

UNE-EN 60917-2-3:2006  UNE

Status: In force / 2006-09-01

Modular order for the development of mechanical structures for electronic equipment practices -- Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Extended detail specification - Dimensions for subracks, chassis, backplanes, front panels and plug-in units (IEC 60917-2-3:2006). (Endorsed by AENOR in September of 2006.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 60297-3-104:2006  UNE

Status: In force / 2006-09-01

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-104: Connector dependent interface dimensions of subracks and plug-in units (IEC 60297-3-104:2006 ) (Endorsed by AENOR in September of 2006.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 62194:2005  UNE

Status: In force / 2005-12-01

Method of evaluating the thermal performance of enclosures (Endorsed by AENOR in December of 2005.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 60297-3-102:2004  UNE

Status: In force / 2004-11-01

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-102: Injector/extractor handle (Endorsed by AENOR in November of 2004.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 60297-3-103:2004  UNE

Status: In force / 2004-11-01

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-103: Keying and alignment pin (Endorsed by AENOR in November of 2004.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 60297-3-101:2004  UNE

Status: In force / 2004-11-01

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-101: Subracks and associated plug-in units (Endorsed by AENOR in November of 2004.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 60917-1/A1:2002  UNE

Status: In force / 2002-02-28

Modular order for the development of mechanical structures for electronic equipment practices -- Part 1: Generic standard.

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 60917-1:2001  UNE

Status: In force / 2001-01-23

Modular order for the development of mechanical structures for electronic equipment practices -- Part 1: Generic standard.

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE-EN 60917-2-2:1997  UNE

Status: In force / 1997-09-19

MODULAR ORDER FOR THE DEVELOPMENT OF MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT PRACTICES. PART 2: SECTIONAL SPECIFICATION. INTERFACE CO-ORDINATION DIMENSIONS FOR THE 25 MM EQUIPMENT PRACTICE. SECTION 2: DETAIL SPECIFICATION. DIMENSIONS FOR SUBRACKS, CHASSIS, BACKPLANES, FRONT PANELS AND PLUG-IN UNITS.

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

UNE 20634:1996  UNE

Status: In force / 1996-06-12

DIMENSIONS FOR THE MOUNTING OF SINGLE-HOLE, BUSH-MOUNTED, SPINDLE-OPERATED ELECTRONIC COMPONENTS.

CTN 201/SC 23J SWITCHES FOR APPLIANCES

UNE-EN 60917-2:1994  UNE

Status: In force / 1995-12-01

MODULAR ORDER FOR THE DEVELOPMENT OF MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT PRACTICES. PART 2: SECTIONAL SPECIFICATION. INTERFACE COORDINATION DIMENSIONS FOR THE 25 MM EQUIPMENT PRACTICE. (Endorsed by AENOR in December of 1995.)

CTN 209/SC 48 ELECTRONIC COMPONENTS AND MECANIC STRUCTURES FOR ELECTRONIC EQUIPMENT

Number of results 88