Skip main navigation
You are at: Home>Standards and Books>Standard finder
Refine your search
Standards
Status
Language

Standard finder

Standard finder

Results for:

Number of results 131

UNE-EN 60034-30-1:2014  UNE

Status: In force / 2014-08-01

Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code) (Endorsed by AENOR in August of 2014.)

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-1:2011  UNE

Status: In force / 2011-04-13

Rotating electrical machines - Part 1: Rating and performance

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-18-42:2017  UNE

Status: In force / 2017-07-01

Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests (Endorsed by Asociación Española de Normalización in July of 2017.)

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-2-1:2014  UNE

Status: In force / 2014-11-01

Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) (Endorsed by AENOR in November of 2014.)

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-2-2:2010  UNE

Status: In force / 2011-10-01

Rotating electrical machines -- Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1 (Endorsed by AENOR in October of 2011.)

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-3:2008  UNE

Status: In force / 2008-10-15

Rotating electrical machines -- Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-11:2005  UNE

Status: In force / 2005-06-01

Rotating electrical machines -- Part 11: Thermal protection

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-18-41:2014/A1:2019  UNE

Status: In force / 2019-11-01

Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests (Endorsed by Asociación Española de Normalización in November of 2019.)

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN IEC 60034-23:2019  UNE

Status: In force / 2019-05-01

Rotating electrical machines - Part 23: Repair, overhaul and reclamation (Endorsed by Asociación Española de Normalización in May of 2019.)

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN IEC 60034-14:2018  UNE

Status: In force / 2018-12-01

Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity (Endorsed by Asociación Española de Normalización in December of 2018.)

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN IEC 60034-27-4:2018  UNE

Status: In force / 2018-11-01

Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines (Endorsed by Asociación Española de Normalización in August of 2018.)

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN IEC 60034-4-1:2018  UNE

Status: In force / 2018-10-01

Rotating electrical machines - Part 4-1: Methods for determining electrically excited synchronous machine quantities from tests (Endorsed by Asociación Española de Normalización in October of 2018.)

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN IEC 60034-27-1:2018  UNE

Status: In force / 2018-08-01

Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the winding insulation

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-12:2017  UNE

Status: In force / 2017-07-01

Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors (Endorsed by Asociación Española de Normalización in July of 2017.)

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-27-3:2016  UNE

Status: In force / 2016-08-01

Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines (Endorsed by AENOR in August of 2016.)

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-19:2015  UNE

Status: In force / 2015-04-01

Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-8:2008/A1:2014  UNE

Status: In force / 2014-09-24

Rotating electrical machines - Part 8: Terminal markings and direction of rotation

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-18-41:2014  UNE

Status: In force / 2014-08-01

Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests (Endorsed by AENOR in August of 2014.)

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN ISO 1680:2014  UNE

Status: In force / 2014-07-29

Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013)

CTN 74/SC 1 NOISE

UNE-EN 60034-28:2013  UNE

Status: In force / 2013-12-18

Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-18-21:2013  UNE

Status: In force / 2013-07-01

Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification (Endorsed by AENOR in July of 2013.)

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-18-31:2013  UNE

Status: In force / 2013-01-23

Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-18-34:2012  UNE

Status: In force / 2012-11-21

Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems

CTN 203/SC 2 ROTATING MACHINERY

UNE 203001-16-2:2001  UNE

Status: In force / 2012-05-22

Rotating electrical machines. Part 16: Excitation systems for synchronous machines. Chapter 2: Models for power system studies.

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-16-1:2012  UNE

Status: In force / 2012-03-28

Rotating electrical machines - Part 16-1: Excitation systems for synchronous machines - Definitions

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-18-32:2010  UNE

Status: In force / 2011-10-01

Rotating electrical machines -- Part 18-32: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation by electrical endurance (Endorsed by AENOR in October of 2011.)

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-4:2008  UNE

Status: In force / 2011-10-01

Rotating electrical machines -- Part 4: Methods for determining synchronous machine quantities from tests (Endorsed by AENOR in October of 2011.)

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-18-1:2010  UNE

Status: In force / 2011-10-01

Rotating electrical machines -- Part 18-1: Functional evaluation of insulation systems - General guidelines (Endorsed by AENOR in October of 2011.)

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60027-4:2011  UNE

Status: In force / 2011-03-16

Letter symbols to be used in electrical technology -- Part 4: Rotating electric machines

CTN 200/SC 25 QUANTITIES AND UNITS, AND THEIR LETTER SYMBOLS

UNE-EN 60034-15:2010  UNE

Status: In force / 2010-10-06

Rotating electrical machines -- Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-29:2009  UNE

Status: In force / 2009-10-14

Rotating electrical machines -- Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-9:2006/A1:2008  UNE

Status: In force / 2008-04-30

Rotating electrical machines -- Part 9: Noise limits

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-8:2008  UNE

Status: In force / 2008-02-27

Rotating electrical machines -- Part 8: Terminal markings and direction of rotation (IEC 60034-8:2007).

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-14:2004/A1:2007  UNE

Status: In force / 2007-10-24

Rotating electrical machines -- Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity (IEC 60034-14:2003/A1:2007).

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-5:2003/A1:2007  UNE

Status: In force / 2007-06-06

Rotating electrical machines -- Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification (IEC 60034-5:2000/A1:2006)

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-9:2006  UNE

Status: In force / 2006-07-31

Rotating electrical machines -- Part 9: Noise limits (IEC 60034-9:2003 modified)

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-5:2003 ERRATUM:2005  UNE

Status: In force / 2005-03-02

Rotating electrical machines -- Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-14:2004  UNE

Status: In force / 2004-07-30

Rotating electrical machines -- Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-5:2003  UNE

Status: In force / 2003-06-27

Rotating electrical machines -- Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-18-22:2003  UNE

Status: In force / 2003-06-27

Rotating electrical machines -- Part 18-22: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Classification of changes and insulation component substitutions

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-7/A1:2003  UNE

Status: In force / 2003-06-27

Rotating electrical machines -- Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-7:1998 ERRATUM  UNE

Status: In force / 1998-05-12

ROTATING ELECTRICAL MACHINES. PART 7: CLASSIFICATION OF TYPES OF CONSTRUCTIONS AND MOUNTING ARRANGEMENTS (IM CODE).

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-7:1997  UNE

Status: In force / 1997-05-22

ROTATING ELECTRICAL MACHINES. PART 7: CLASSIFICATION OF TYPES OF CONSTRUCTION AND MOUNTING ARRANGEMENTS (IM CODE).

CTN 203/SC 2 ROTATING MACHINERY

UNE-EN 60034-6:1997  UNE

Status: In force / 1997-04-24

ROTATING ELECTRICAL MACHINES. PART 6: METHODS OF COOLING (IC CODE).

CTN 203/SC 2 ROTATING MACHINERY

UNE-IEC 60050-411:2011  UNE

Status: In force / 2011-04-27

International Electrotechnical Vocabulary - Part 411: Rotating machinery.

CTN 191/SC 5 ELECTRICAL TERMINOLOGY

ISO 1680:2013  ISO

Status: In force / 2013-12-02

Acoustics -- Test code for the measurement of airborne noise emitted by rotating electrical machines

048474 ISO/TC 43/SC 1 - Noise

PNE-prEN IEC 60034-5:2019  PROY

Status: Procedure

Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

CTN 203/SC 2 ROTATING MACHINERY

PNE-prEN IEC 60034-2-3:2019  PROY

Status: Procedure

Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors

CTN 203/SC 2 ROTATING MACHINERY

PNE-EN 60034-18-42:2017/prA1:2018  PROY

Status: Procedure

Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests

CTN 203/SC 2 ROTATING MACHINERY

PNE-prEN 60034-3:2018  PROY

Status: Procedure

Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators

CTN 203/SC 2 ROTATING MACHINERY

Number of results 131