Skip main navigation
You are at: Home>Standards and Books>Standard finder
Refine your search
Standards
Status
Language

Standard finder

Standard finder

Results for:

Number of results 130

UNE-EN ISO 15641:2002  UNE

Status: In force / 2002-07-29

Milling cutters for high speed machining - Safety requirements. (ISO 15641:2001).

CTN 15 MACHINE TOOLS

UNE 16259:1985  UNE

Status: In force / 1985-06-15

FORMED MILLING CUTTER. HALF CONCAVO (QUARTER OF CIRCLE).

CTN 16 TOOLS

UNE 16257:1985  UNE

Status: In force / 1985-05-15

FORMED MILLING CUTTER. HALF CIRCULAR CONVEX.

CTN 16 TOOLS

UNE 16258:1985  UNE

Status: In force / 1985-05-15

FORMED MILLING CUTTER. HALF CIRCULAR CONCAVO.

CTN 16 TOOLS

UNE 16253:1985  UNE

Status: In force / 1985-04-15

MILLING CUTTERS MOUNTED ON CENTRINY ARBORS HERING A 7/24 TIPER.

CTN 16 TOOLS

UNE 16006:1985  UNE

Status: In force / 1985-01-15

MILLING MACHINES ARBORS, CLAMP SCREWS.

CTN 16 TOOLS

UNE 16224:1981  UNE

Status: In force / 1981-04-15

MILLING CUTTERS. NOMENCLATURE.

CTN 16 TOOLS

UNE 16201:1975  UNE

Status: In force / 1975-04-15

SINGLE CUTTING PARALLEL MILLING CUTTERS WITH KEY DRIVE.

CTN 16 TOOLS

UNE 16202:1975  UNE

Status: In force / 1975-04-15

SINGLE CUTTING PARALLEL MILLING CUTTERS WITH KEY DRIVE.

CTN 16 TOOLS

UNE 16203:1975  UNE

Status: In force / 1975-04-15

SINGLE CUTTING SLOT PARALLEL MILLING CUTTERS WITH KEY DRIVE.

CTN 16 TOOLS

UNE 16004:2000  UNE

Status: In force / 2000-01-28

Milling cutters. Interchangeability dimensions for cutter arbors or cutter mandrels.

CTN 16 TOOLS

UNE 16011:2000  UNE

Status: In force / 2000-01-28

Cylindrical shanks for milling cutters. Part 1: Dimensional characteristics of plain cylindrical shanks.

CTN 16 TOOLS

UNE 16012:2000  UNE

Status: In force / 2000-01-28

Cylindrical shanks for milling cutters. Part 2: Dimensional characteristics of flatted cylindrical shanks.

CTN 16 TOOLS

UNE 18096:1984  UNE

Status: In force / 1984-05-15

GEAR HOBS. SINGLE START. ACCURACY REQUIREMENTS.

CTN 18 TRANSMISSIONS, BEARINGS AND GEARS

UNE 18029:1978  UNE

Status: In force / 1978-06-15

GEARS. TOOLS FOR CUTTING. SINGLE-START SOLID (MONO-BLOC) GEAR HOBS WITH AXIAL KEYWAY, 1 TO 20 DIAMETRAL PITCH.

CTN 18 TRANSMISSIONS, BEARINGS AND GEARS

UNE 18060:1978  UNE

Status: In force / 1978-06-15

GEARS. CUTTING TOOLS. HOBBING CUTTERS WITH ONE FILLET TIPS. QUALITY.

CTN 18 TRANSMISSIONS, BEARINGS AND GEARS

UNE 16017:1975  UNE

Status: In force / 1975-04-15

LONG END FACE MILLING CUTTERS WITH TWO LIPS AND PARALLEL SHANK.

CTN 16 TOOLS

UNE 16018:1975  UNE

Status: In force / 1975-04-15

SHORT END AND FACE MILLING CUTTERS WITH TWO LIPS AND TAPPED MORSE TAPER SHANK.

CTN 16 TOOLS

UNE 16022:1975  UNE

Status: In force / 1975-04-15

SHORT END AND FACE MILLING CUTTERS WITH SEVERAL LIPS AND TAPPED MORSE TAPER SHANK.

CTN 16 TOOLS

UNE 16023:1975  UNE

Status: In force / 1975-04-15

LONG END AND FACE MILLING CUTTERS WITH SEVERAL LIPS AND TAPPED MORSE TAPER SHANK.

CTN 16 TOOLS

UNE 16200:1975  UNE

Status: In force / 1975-04-15

THREE CUTTING PARALLEL MILLING CUTTERS WITH KEY DRIVE.

CTN 16 TOOLS

UNE 16013:1975  UNE

Status: In force / 1975-02-15

SHORT PARALLEL AND FACE MILLING CUTTERS WITH TWO LIPS AND PARALLEL SHANK.

CTN 16 TOOLS

UNE 16019:1975  UNE

Status: In force / 1975-02-15

LONG END AND FACE MILLING CUTTERS WITH TWO LIPS AND TAPPED MORSE TAPER SHANK.

CTN 16 TOOLS

UNE 16020:1975  UNE

Status: In force / 1975-02-15

SHORT END AND FACE MILLING CUTTERS WITH SEVERAL LIPS AND PARALLEL SHANK.

CTN 16 TOOLS

UNE 16021:1975  UNE

Status: In force / 1975-02-15

LONG END AND FACE MILLING CUTTERS WITH SEVERAL LIPS AND PARALLEL SHANK.

CTN 16 TOOLS

ISO 240:2016  ISO

Status: In force / 2016-07-28

Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 1641-1:2016  ISO

Status: In force / 2016-07-21

End mills and slot drills — Part 1: Milling cutters with cylindrical shanks

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 6262-1:2013  ISO

Status: In force / 2013-09-03

End mills with indexable inserts — Part 1: End mills with flatted cylindrical shank

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 6986:2013  ISO

Status: In force / 2013-09-02

Side and face milling (slotting) cutters with indexable inserts — Dimensions

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 3338-2:2013  ISO

Status: In force / 2013-08-07

Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 11529:2013  ISO

Status: In force / 2013-04-15

Milling cutters — Designation — Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 15917:2012  ISO

Status: In force / 2012-06-29

Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 6462:2011  ISO

Status: In force / 2011-05-05

Face and shoulder milling cutters with indexable inserts — Dimensions

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 15641:2001  ISO

Status: In force / 2001-09-13

Milling cutters for high speed machining — Safety requirements

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 2587:1972  ISO

Status: In force / 1972-12-01

Side and face milling cutters with plain bore and key drive — Metric series

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 2780:2018  ISO

Status: In force / 2018-09-21

Milling cutters with tenon drive — Interchangeability dimensions for cutter arbors — Metric series

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 10911:2017  ISO

Status: In force / 2017-07-26

Solid hardmetal end mills with cylindrical shank — Dimensions

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 2584:2016  ISO

Status: In force / 2016-10-12

Cylindrical cutters with plain bore and key drive — Metric series

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 10145-2:2016  ISO

Status: In force / 2016-03-07

End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper shank

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 10145-1:2016  ISO

Status: In force / 2016-03-04

End mills with brazed helical hardmetal tips — Part 1: Dimensions of end mills with parallel shank

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 6262-2:2013  ISO

Status: In force / 2013-09-02

End mills with indexable inserts — Part 2: End mills with Morse taper shank

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 7755-4:2013  ISO

Status: In force / 2013-08-08

Hardmetal burrs — Part 4: Spherical burrs (style D)

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 7755-2:2013  ISO

Status: In force / 2013-08-08

Hardmetal burrs — Part 2: Cylindrical burrs (style A)

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 7755-3:2013  ISO

Status: In force / 2013-08-08

Hardmetal burrs — Part 3: Cylindrical round- (ball-) nose burrs (style C)

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 7755-9:2013  ISO

Status: In force / 2013-08-08

Hardmetal burrs — Part 9: 60 degrees and 90 degrees cone burrs (styles J and K)

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 7755-10:2013  ISO

Status: In force / 2013-08-08

Hardmetal burrs — Part 10: Conical round- (ball-) nose burrs (style L)

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

Number of results 130