Skip main navigation
You are at: Home>Standards and Books>Standard finder
Status
Language
Standard finder

Standard finder

Results for:

Number of results 184

UNE-EN ISO 4957:2019  UNE

Status: In force / 2019-04-24

Tool steels (ISO 4957:2018)

CTN 36 IRON AND STEEL

UNE 88412:2006  UNE

Status: In force / 2016-12-21

Fibre-cement products NT (without asbestos). Guidelines for on-site cutting and machining works.

CTN 88 FIBRE-CEMENTS PRODUCTS

UNE-EN 62541-100:2015  UNE

Status: In force / 2015-06-01

OPC unified architecture - Part 100: Device Interface (Endorsed by AENOR in June of 2015.)

CTN 203/SC 65 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL. FIELDBUS

UNE-EN 62541-10:2015  UNE

Status: In force / 2015-06-01

OPC unified architecture - Part 10:Programs (Endorsed by AENOR in June of 2015.)

CTN 203/SC 65 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL. FIELDBUS

UNE-EN 62541-13:2015  UNE

Status: In force / 2015-06-01

OPC unified architecture - Part 13: Aggregates (Endorsed by AENOR in June of 2015.)

CTN 203/SC 65 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL. FIELDBUS

UNE-EN 62541-7:2015  UNE

Status: In force / 2015-06-01

OPC unified architecture - Part 7: Profiles (Endorsed by AENOR in June of 2015.)

CTN 203/SC 65 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL. FIELDBUS

UNE-EN 62541-9:2015  UNE

Status: In force / 2015-06-01

OPC unified architecture - Part 9: Alarms and conditions (Endorsed by AENOR in June of 2015.)

CTN 203/SC 65 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL. FIELDBUS

UNE 16149-1/1C:1986  UNE

Status: In force / 1986-05-15

BASIC QUANTITIES IN CUTTING AND GRINDING - PART 1: GEOMETRY OF THE ACTIVE PART OF CUTTING TOOLS - GENERAL TERMS, REFERENCE SYSTEMS, TOOL AND WORKING ANGLES, CHIP BREAKERS.

CTN 16 TOOLS

UNE 16152:1985  UNE

Status: In force / 1985-01-15

SIMPLE POINT CUTTING TOOLS. CORRER RADU.

CTN 16 TOOLS

UNE 16118:1984  UNE

Status: In force / 1984-12-15

INDEXABLE INSERTS WITH FACET. TYPES: TPAN-TPCN-TPKN.

CTN 16 TOOLS

UNE 16117:1984  UNE

Status: In force / 1984-09-15

INDEXABLE INSERTS WITH FACET. TYPES' SNAN-SNCN-SNKN-SPAN-SPCN-SPKN.

CTN 16 TOOLS

UNE 16115:1983  UNE

Status: In force / 1983-05-15

INDEXABLE INSERTS. TYPE TNUM-TNGN-TPUN-TPGN.

CTN 16 TOOLS

UNE 16116:1983  UNE

Status: In force / 1983-05-15

INDEXABLE INSERTS. TYPE SNUM-SNGN-SPUN-SPGN.

CTN 16 TOOLS

UNE 16120:1983  UNE

Status: In force / 1983-05-15

CARBIDE TIPS FOR SPECIAL TOOLS, TYPES G, H AND J.

CTN 16 TOOLS

UNE 16164:1982  UNE

Status: In force / 1982-11-15

CARBIDE TIPS FOR THREADING.

CTN 16 TOOLS

UNE 16149-1:1982  UNE

Status: In force / 1982-10-15

GEOMETRY OF THE ACTIVE PART CUTTING TOOLS. PART 1. GENERAL TERMS, REFERENCE SYSTEMS, TOOL AND WORKING ANGLES.

CTN 16 TOOLS

UNE 16100:1982  UNE

Status: In force / 1982-09-15

CARBIDE TIPS. GROUPS OF APPLICATION.

CTN 16 TOOLS

UNE 16002:1975  UNE

Status: In force / 1975-04-15

CUTTING TOOLS. CLASSIFICATION.

CTN 16 TOOLS

UNE 16131:1975  UNE

Status: In force / 1975-02-15

DIAMETERS OF SHANK AND DRIVING SQUARES FOR TURNING TOOLS.

CTN 16 TOOLS

UNE 16113:1975  UNE

Status: In force / 1975-02-15

CODE OF CARBIDE AND CERAMIC TIPS DESIGNATION FOR MECHANICAL FIXING TIPS.

CTN 16 TOOLS

ISO 16084:2017  ISO

Status: In force / 2017-10-25

Balancing of rotating tools and tool systems

047464 ISO/TC 29 - Small tools

ISO 13399-1:2006/Cor 2:2011  ISO

Status: In force / 2011-03-10

ISO 13399-1:2006/Cor 2:2011

047464 ISO/TC 29 - Small tools

ISO 13399-1:2006/Cor 1:2008  ISO

Status: In force / 2008-01-07

ISO 13399-1:2006/Cor 1:2008

047464 ISO/TC 29 - Small tools

ISO 13399-1:2006  ISO

Status: In force / 2006-02-09

Cutting tool data representation and exchange -- Part 1: Overview, fundamental principles and general information model

047464 ISO/TC 29 - Small tools

ISO 3364:2017  ISO

Status: In force / 2017-08-09

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole -- Dimensions

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 1832:2017  ISO

Status: In force / 2017-02-27

Indexable inserts for cutting tools -- Designation

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 3365:2016  ISO

Status: In force / 2016-03-04

Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole -- Dimensions

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5611-5:2015  ISO

Status: In force / 2015-11-18

Cartridges, type A, for indexable inserts -- Part 5: Style K

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5611-6:2015  ISO

Status: In force / 2015-11-18

Cartridges, type A, for indexable inserts -- Part 6: Style L

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5611-7:2015  ISO

Status: In force / 2015-11-18

Cartridges, type A, for indexable inserts -- Part 7: Style R

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5611-8:2015  ISO

Status: In force / 2015-11-18

Cartridges, type A, for indexable inserts -- Part 8: Style S

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5611-9:2015  ISO

Status: In force / 2015-11-18

Cartridges, type A, for indexable inserts -- Part 9: Style T

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5611-10:2015  ISO

Status: In force / 2015-11-18

Cartridges, type A, for indexable inserts -- Part 10: Style U

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5611-11:2015  ISO

Status: In force / 2015-11-18

Cartridges, type A, for indexable inserts -- Part 11: Style W

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5611-12:2015  ISO

Status: In force / 2015-11-18

Cartridges, type A, for indexable inserts -- Part 12: Style Y

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5611-1:2015  ISO

Status: In force / 2015-11-18

Cartridges, type A, for indexable inserts -- Part 1: General survey, correlation and determination of dimensions

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5611-2:2015  ISO

Status: In force / 2015-11-18

Cartridges, type A, for indexable inserts -- Part 2: Style F

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5611-3:2015  ISO

Status: In force / 2015-11-18

Cartridges, type A, for indexable inserts -- Part 3: Style G

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5611-4:2015  ISO

Status: In force / 2015-11-18

Cartridges, type A, for indexable inserts -- Part 4: Style J

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5610-15:2014  ISO

Status: In force / 2014-08-21

Tool holders with rectangular shank for indexable inserts -- Part 15: Style V

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5610-11:2014  ISO

Status: In force / 2014-08-21

Tool holders with rectangular shank for indexable inserts -- Part 11: Style R

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5610-12:2014  ISO

Status: In force / 2014-08-21

Tool holders with rectangular shank for indexable inserts -- Part 12: Style S

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5610-13:2014  ISO

Status: In force / 2014-08-21

Tool holders with rectangular shank for indexable inserts -- Part 13: Style T

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5610-14:2014  ISO

Status: In force / 2014-08-21

Tool holders with rectangular shank for indexable inserts -- Part 14: Style H

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5610-1:2014  ISO

Status: In force / 2014-08-21

Tool holders with rectangular shank for indexable inserts -- Part 1: General survey, correlation and determination of dimensions

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5610-2:2014  ISO

Status: In force / 2014-08-21

Tool holders with rectangular shank for indexable inserts -- Part 2: Style A

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5610-3:2014  ISO

Status: In force / 2014-08-21

Tool holders with rectangular shank for indexable inserts -- Part 3: Style B

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 5610-4:2014  ISO

Status: In force / 2014-08-21

Tool holders with rectangular shank for indexable inserts -- Part 4: Style D

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

Number of results 184

Lo más vendido

Standards
Books