Skip main navigation
You are at: Home>Standards and Books>Standard finder
Refine your search
Standards
Status
Language

Standard finder

Standard finder

Results for:

Number of results 151

UNE-ISO 702-1:2011  UNE

Status: In force / 2011-07-27

Machine tools -- Connecting dimensions of spindle noses and work holding chucks -- Part 1: Conical connection

CTN 15 MACHINE TOOLS

UNE-ISO 702-3:2011  UNE

Status: In force / 2011-10-26

Machine tools -- Connecting dimensions of spindle noses and work holding chucks -- Part 3: Bayonet type

CTN 15 MACHINE TOOLS

UNE-EN 1550:1998+A1:2008  UNE

Status: In force / 2013-07-01

Machine-tools safety - Safety requirements for the design and construction of work holding chucks

CTN 15 MACHINE TOOLS

UNE-ISO 3442-1:2013  UNE

Status: In force / 2013-01-16

Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 1: Manually operated chucks with tongue and groove type jaws

CTN 15 MACHINE TOOLS

UNE-ISO 3442-2:2013  UNE

Status: In force / 2013-01-16

Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 2: Power-operated chucks with tongue and groove type jaws

CTN 15 MACHINE TOOLS

UNE-ISO 3442-3:2013  UNE

Status: In force / 2013-01-16

Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 3: Power-operated chucks with serrated jaws

CTN 15 MACHINE TOOLS

UNE-ISO 3089:2013  UNE

Status: In force / 2013-01-16

Machine tools -- Test conditions for self-centring, manually operated chucks with one-piece jaws

CTN 15 MACHINE TOOLS

UNE-ISO 702-2:2011  UNE

Status: In force / 2011-10-26

Machine tools -- Connecting dimensions of spindle noses and work holding chucks -- Part 2: Camlock type

CTN 15 MACHINE TOOLS

UNE-ISO 702-4:2008  UNE

Status: In force / 2008-07-02

Machine tools. Connecting dimensions of spindle noses and work holding chucks- Part 4: cilindrical connection.

CTN 15 MACHINE TOOLS

UNE 15007:1994  UNE

Status: In force / 1994-03-23

MACHINE TOOLS. SELF-HOLDING TAPERS FOR TOOL SHANKS.

CTN 15 MACHINE TOOLS

UNE 15003:1994  UNE

Status: In force / 1994-01-19

MACHINE TOOLS. MORSE TAPER SHANKS. COTTER SLOTS WITH TAPER KEYS.

CTN 15 MACHINE TOOLS

UNE 15009-1:1994  UNE

Status: In force / 1994-01-19

TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS. PART 1: SHANKS NOS. 40, 45 AND 50. DIMENSIONS AND CONICITY TOLERANCES.

CTN 15 MACHINE TOOLS

UNE 15009-2:1994  UNE

Status: In force / 1994-01-19

TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS. PART 2: RETENTION KNOBS FOR SHANKS NOS. 40, 45 AND 50. DIMENSIONS AND MECHANICAL CHARACTERISTICS.

CTN 15 MACHINE TOOLS

UNE 15218:1992  UNE

Status: In force / 1992-11-16

MACHINE TOOL TABLES. T-SLOTS AND CORRESPONDING BOLTS.

CTN 15 MACHINE TOOLS

UNE 15433:1992  UNE

Status: In force / 1992-07-08

ACCEPTANCE CONDITIONS OF MECHANICAL DIVIDING HEAD FOR MACHINE TOOLS. TESTING OF ACCURACY.

CTN 15 MACHINE TOOLS

UNE 16150:1985  UNE

Status: In force / 1985-01-15

JIG BUSHES. DEFINITIONS AND NOMENCLATURE.

CTN 16 TOOLS

UNE 15002:1994  UNE

Status: In force / 1994-07-06

7/24 TAPERS FOR TOOL SHANKS FOR AUTOMATIC CHANGING. TAPERS FOR SPINDLE NOSES.

CTN 15 MACHINE TOOLS

UNE 15008:1994  UNE

Status: In force / 1994-03-23

7/24 TAPERS FOR TOOL SHANKS FOR MANUAL CHANGING.

CTN 15 MACHINE TOOLS

UNE 16009:1985  UNE

Status: In force / 1985-04-15

MILLING MACHINE ARBORS WITH 7/24 TAPERS.

CTN 16 TOOLS

UNE 16007:1985  UNE

Status: In force / 1985-03-15

MORSE TAPER WITH TREADED HOLE AND DRIVING PLANES.

CTN 16 TOOLS

UNE 16133:1985  UNE

Status: In force / 1985-03-15

EXTENSION SOCKETS FOR TOOLS WITH MORSE TIPERS SHANKS

CTN 16 TOOLS

UNE 16221:1985  UNE

Status: In force / 1985-03-15

CUTTERS ARBORS WITH TENON DRIVE. DIMENSIONS.

CTN 16 TOOLS

UNE 16222:1985  UNE

Status: In force / 1985-03-15

CUTTERS ARBORS WITH TENON DRIVE. DIMENSIONS.

CTN 16 TOOLS

UNE 16010:1985  UNE

Status: In force / 1985-01-15

SOCKETS AND NUTS FOR MILLING MACHINE ARBORS.

CTN 16 TOOLS

UNE 16132:1985  UNE

Status: In force / 1985-01-15

REDUNTION SLEEVES FOR TOOLS WITH MORSE TAPER SHANKS.

CTN 16 TOOLS

UNE 16151:1982  UNE

Status: In force / 1982-09-15

JIG BUSHES AND ACCESORIES FOR DRILLING PURPOSES. DIMENSIONS.

CTN 16 TOOLS

UNE 16166:1982  UNE

Status: In force / 1982-09-15

PULLING TONQUES FOR CYLINDRIC HOLDERS OF TOOLS.

CTN 16 TOOLS

ISO 12164-3:2014  ISO

Status: In force / 2014-12-08

Hollow taper interface with flange contact surface -- Part 3: Dimensions of shanks for stationary tools

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 10889-2:2016  ISO

Status: In force / 2016-03-09

Tool holders with cylindrical shank -- Part 2: Type A, shanks for tool holders of special designs

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 12164-4:2014  ISO

Status: In force / 2014-12-08

Hollow taper interface with flange contact surface -- Part 4: Dimensions of receivers for stationary tools

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 26623-1:2014  ISO

Status: In force / 2014-08-19

Polygonal taper interface with flange contact surface -- Part 1: Dimensions and designation of shanks

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 10649-1:2013  ISO

Status: In force / 2013-11-04

Cutter arbors with parallel key and tenon drive -- Part 1: General dimensions

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 7388-1:2007  ISO

Status: In force / 2007-07-30

Tool shanks with 7/24 taper for automatic tool changers -- Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 10889-1:2004  ISO

Status: In force / 2004-11-18

Tool holders with cylindrical shank -- Part 1: Cylindrical shank, location bore -- Technical delivery conditions

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 702-4:2004  ISO

Status: In force / 2004-05-18

Machine tools -- Connecting dimensions of spindle noses and work holding chucks -- Part 4: Cylindrical connection

048404 ISO/TC 39/SC 8 - Work holding spindles and chucks

ISO 839-2:1977  ISO

Status: In force / 1977-08-01

Milling machine arbors with 7/24 tapers -- Part 2: Accessories

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 26622-1:2017  ISO

Status: In force / 2017-04-27

Modular taper interface with ball track system -- Part 1: Dimensions and designation of shanks

047464 ISO/TC 29 - Small tools

ISO 238:2016  ISO

Status: In force / 2016-11-14

Reduction sleeves and extension sockets for tools with Morse taper shanks

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 4202:2016  ISO

Status: In force / 2016-10-24

Reduction sleeves with external 7/24 taper for tools with Morse taper shanks

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 4207:2016  ISO

Status: In force / 2016-10-24

Counterbores with Morse taper shanks and detachable pilots

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 10897:2016  ISO

Status: In force / 2016-08-24

Collets for tool holders with taper ratio 1:10 -- Collets, holders, nuts

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 10889-3:2016  ISO

Status: In force / 2016-03-10

Tool holders with cylindrical shank -- Part 3: Type B with rectangular radial seat

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 10889-4:2016  ISO

Status: In force / 2016-03-10

Tool holders with cylindrical shank -- Part 4: Type C with rectangular axial seat

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 10889-6:2016  ISO

Status: In force / 2016-03-10

Tool holders with cylindrical shank -- Part 6: Type E with cylindrical seat

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 10889-7:2016  ISO

Status: In force / 2016-03-10

Tool holders with cylindrical shank -- Part 7: Type F with taper seat

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 10889-5:2016  ISO

Status: In force / 2016-03-10

Tool holders with cylindrical shank -- Part 5: Type D with more than one rectangular seat

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 7388-3:2016  ISO

Status: In force / 2016-01-28

Tool shanks with 7/24 taper for automatic tool changers -- Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 26623-2:2014  ISO

Status: In force / 2014-08-19

Polygonal taper interface with flange contact surface -- Part 2: Dimensions and designation of receivers

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 10649-2:2013  ISO

Status: In force / 2013-10-15

Cutter arbors with parallel key and tenon drive -- Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 10649-3:2013  ISO

Status: In force / 2013-10-15

Cutter arbors with parallel key and tenon drive -- Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer

047530 ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

Number of results 151