Skip main navigation
You are at: Home>Standards and Books>Standard finder
Refine your search
Standards
Status
Language

Standard finder

Standard finder

Results for:

Number of results 329

UNE-EN ISO 7396-1:2016  UNE

Status: In force / 2016-11-02

Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016)

CTN 110 ANAESTHETIC AND RESPIRATORY EQUIPMENT

UNE 60302:2015  UNE

Status: In force / 2015-09-16

Pipelines for gaseous fuels. Emplacement.

CTN 60 GASEOUS FUELS AND GAS AND INSTALLATIONS APPARATUS

UNE-CEN/TR 12108:2015 IN  UNE

Status: In force / 2015-01-14

Plastics piping systems - Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN 1453-1:2017  UNE

Status: In force / 2017-10-11

Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system. (Consolidated version)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN 476:2011  UNE

Status: In force / 2015-11-12

General requirements for components used in drains and sewers

CTN 149 WATER ENGINEERING

UNE-CEN/TS 1555-7:2015  UNE

Status: In force / 2015-01-21

Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-CEN/TS 14632:2013 EX  UNE

Status: In force / 2013-04-30

Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 22391-2:2010  UNE

Status: In force / 2010-10-13

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes (ISO 22391-2:2009)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 1452-2:2010  UNE

Status: In force / 2010-09-15

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes (ISO 1452-2:2009)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 21003-5:2009  UNE

Status: In force / 2009-01-14

Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system (ISO 21003-5:2008)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN 1401-1:2009  UNE

Status: In force / 2009-07-22

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 14692-2:2017  UNE

Status: In force / 2017-10-01

Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2017) (Endorsed by Asociación Española de Normalización in October of 2017.)

CTN 62/SC 8 PETROLEUM AND GAS INDUSTRIES

UNE-CEN/TR 13480-7:2017  UNE

Status: In force / 2017-10-01

Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures (Endorsed by Asociación Española de Normalización in October of 2017.)

CTN 62/SC 9 INDUSTRIAL PIPELINES

UNE-EN 13052-1:2002  UNE

Status: In force / 2017-09-19

Influence of materials on water intended for human consumption - Organic materials - Determination of colour and turbidity of water in piping systems - Part 1: Test method.

CTN 77/SC 1 WATER

UNE-CEN/TS 1453-2:2017  UNE

Status: In force / 2017-07-26

Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-CEN/TS 12201-7:2014  UNE

Status: In force / 2014-12-01

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity (Endorsed by AENOR in December of 2014.)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN 12560-2:2014  UNE

Status: In force / 2014-11-12

Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges

CTN 19/SC 1 CAST IRON PIPES, FITTINGS, ACCESSORIES AND FLANGES

UNE-EN 12201-1:2012  UNE

Status: In force / 2012-05-03

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 21003-2:2009/A1:2011  UNE

Status: In force / 2011-12-28

Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes - Amendment 1 (ISO 21003-2:2008/Amd 1:2011)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN 1555-1:2011  UNE

Status: In force / 2011-03-16

Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 22391-1:2010  UNE

Status: In force / 2010-10-13

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General (ISO 22391-1:2009)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 1452-1:2010  UNE

Status: In force / 2010-09-15

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 21003-1:2009 ERRATUM:2009  UNE

Status: In force / 2009-02-04

Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 21003-2:2009 ERRATUM:2009  UNE

Status: In force / 2009-02-04

Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 21003-3:2009 ERRATUM:2009  UNE

Status: In force / 2009-02-04

Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 21003-5:2009 ERRATUM:2009  UNE

Status: In force / 2009-02-04

Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system (ISO 21003-5:2008)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 21003-1:2009  UNE

Status: In force / 2009-01-14

Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 21003-2:2009  UNE

Status: In force / 2009-01-14

Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 21003-3:2009  UNE

Status: In force / 2009-01-14

Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 6708:1996  UNE

Status: In force / 1996-05-23

PIPEWORK COMPONENTS. DEFINITION AND SELECTION OF DN (NOMINAL SIZE). (ISO 6708:1995).

CTN 19 CAST IRON PIPES, METALLIC TAPWARE, VALVES AND FITTINGS

UNE-EN ISO 13845:2015  UNE

Status: In force / 2015-07-29

Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-CEN ISO/TS 21003-7:2019  UNE

Status: In force / 2019-11-01

Multilayer piping systems for hot and cold water installations inside buildings - Part 7: Guidance for the assessment of conformity (ISO/TS 21003-7:2019) (Endorsed by Asociación Española de Normalización in November of 2019.)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 7396-1:2016/A1:2019  UNE

Status: In force / 2019-10-02

Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Amendment 1 (ISO 7396-1:2016/Amd 1:2017)

CTN 110 ANAESTHETIC AND RESPIRATORY EQUIPMENT

UNE-EN 13476-1:2018  UNE

Status: In force / 2019-09-25

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1:General requirements and performance characteristics

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN ISO 13056:2019  UNE

Status: In force / 2019-09-25

Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN 13476-2:2019  UNE

Status: In force / 2019-09-25

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN 13476-3:2019  UNE

Status: In force / 2019-09-25

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B

CTN 53/SC 2 PLASTIC PIPES AND FITTINGS

UNE-EN 13480-2:2017/A2:2018  UNE

Status: In force / 2019-09-01

Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.)

CTN 62/SC 9 INDUSTRIAL PIPELINES

UNE-EN 13480-6:2017  UNE

Status: In force / 2019-09-01

Metallic industrial piping - Part 6: Additional requirements for buried piping (Endorsed by Asociación Española de Normalización in September of 2019.)

CTN 62/SC 9 INDUSTRIAL PIPELINES

UNE-EN 13480-6:2017/A1:2019  UNE

Status: In force / 2019-09-01

Metallic industrial piping - Part 6: Additional requirements for buried piping (Endorsed by Asociación Española de Normalización in September of 2019.)

CTN 62/SC 9 INDUSTRIAL PIPELINES

UNE-EN 13480-8:2017  UNE

Status: In force / 2019-09-01

Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (Endorsed by Asociación Española de Normalización in September of 2019.)

CTN 62/SC 9 INDUSTRIAL PIPELINES

UNE-EN 13480-1:2017  UNE

Status: In force / 2019-09-01

Metallic industrial piping - Part 1: General (Endorsed by Asociación Española de Normalización in September of 2019.)

CTN 62/SC 9 INDUSTRIAL PIPELINES

UNE-EN 13480-2:2017  UNE

Status: In force / 2019-09-01

Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.)

CTN 62/SC 9 INDUSTRIAL PIPELINES

UNE-EN 13480-2:2017/A3:2018  UNE

Status: In force / 2019-09-01

Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.)

CTN 62/SC 9 INDUSTRIAL PIPELINES

UNE-EN 13480-2:2017/A1:2018  UNE

Status: In force / 2019-09-01

Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.)

CTN 62/SC 9 INDUSTRIAL PIPELINES

UNE-EN 13480-3:2017  UNE

Status: In force / 2019-09-01

Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in September of 2019.)

CTN 62/SC 9 INDUSTRIAL PIPELINES

UNE-EN 13480-4:2017  UNE

Status: In force / 2019-09-01

Metallic industrial piping - Part 4: Fabrication and installation (Endorsed by Asociación Española de Normalización in September of 2019.)

CTN 62/SC 9 INDUSTRIAL PIPELINES

UNE-EN 13480-5:2017  UNE

Status: In force / 2019-09-01

Metallic industrial piping - Part 5: Inspection and testing (Endorsed by Asociación Española de Normalización in September of 2019.)

CTN 62/SC 9 INDUSTRIAL PIPELINES

UNE-EN 13480-5:2017/A1:2019  UNE

Status: In force / 2019-09-01

Metallic industrial piping - Part 5: Inspection and testing (Endorsed by Asociación Española de Normalización in September of 2019.)

CTN 62/SC 9 INDUSTRIAL PIPELINES

UNE-EN 13480-1:2017/A1:2019  UNE

Status: In force / 2019-09-01

Metallic industrial piping - Part 1: General (Endorsed by Asociación Española de Normalización in September of 2019.)

CTN 62/SC 9 INDUSTRIAL PIPELINES

Number of results 329