Skip main navigation
You are at: Home>Standards and Books>Standard finder
Refine your search
Standards
Status
Language

Standard finder

Standard finder

Results for:

Number of results 68

UNE-EN ISO 1101:2017  UNE

Status: In force / 2017-04-01

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) (Endorsed by Asociación Española de Normalización in April of 2017.)

CTN 82/SC 2 DIMENSIONAL METROLOGY

UNE-EN 22768-1:1994  UNE

Status: In force / 1994-07-06

GENERAL TOLERANCES. PART 1: TOLERANCES FOR LINEAL AND ANGULAR DIMENSIONS WITHOUT INDIVIDUAL TOLERANCE INDICATIONS.

CTN 82/SC 2 DIMENSIONAL METROLOGY

UNE-EN 22768-2:1994  UNE

Status: In force / 1994-06-29

GENERAL TOLERANCES. PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS. (ISO 2768-2:1989).

CTN 82/SC 2 DIMENSIONAL METROLOGY

UNE-EN ISO 1938-2:2019  UNE

Status: In force / 2019-03-27

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)

CTN 82/SC 2 DIMENSIONAL METROLOGY

UNE-EN ISO 14253-1:2019  UNE

Status: In force / 2019-03-27

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)

CTN 82/SC 2 DIMENSIONAL METROLOGY

UNE 82001:1991  UNE

Status: In force / 1991-01-21

TERMINOLOGY OF LIMITS AND FITS.

CTN 82/SC 1 GENERAL METROLOGY

UNE 4033:1983  UNE

Status: In force / 1983-05-15

TOLERANCES OF FABRICATION AND ADMISSIBLE USAGE OF GAUGES.

CTN 82/SC 2 DIMENSIONAL METROLOGY

UNE 4035:1981  UNE

Status: In force / 1981-07-15

TOLERANCED DIMENSIONES. CONVERSION FROM INCHES INTO MILIMETRES AND VICEVERSA.

CTN 82/SC 2 DIMENSIONAL METROLOGY

UNE 4034:1979  UNE

Status: In force / 1979-12-15

MARKING AND DESIGNATION OF GAUGES.

CTN 82/SC 2 DIMENSIONAL METROLOGY

UNE 4030:1976 EX  UNE

Status: In force / 1976-04-15

VERIFICATION OF PLAIN PARTS. GENERAL CONCEPT.

CTN 82/SC 2 DIMENSIONAL METROLOGY

UNE-EN ISO 14405-1:2018  UNE

Status: In force / 2018-09-19

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)

CTN 82/SC 2 DIMENSIONAL METROLOGY

UNE 4032:1979  UNE

Status: In force / 1979-12-15

INSPECTION OF TOLERANCES OF PLAIN WORKPIECES. DIMENSIONS AND USE OF GANGES.

CTN 82/SC 2 DIMENSIONAL METROLOGY

UNE 4036:1979  UNE

Status: In force / 1979-12-15

INSPECTION OF TOLERANCES OF PLAIN WORKPIECES. INDICATING MEASURING INSTRUMENTS.

CTN 82/SC 2 DIMENSIONAL METROLOGY

UNE 4031:1976 EX  UNE

Status: In force / 1976-12-15

VERIFICATION OF PLAIN PARTS. TOLERANCES. GENERALITIES. LIMIT GAGES.

CTN 82/SC 2 DIMENSIONAL METROLOGY

ISO 2768-1:1989  ISO

Status: In force / 1989-11-02

General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications

054924 ISO/TC 213 - Dimensional and geometrical product specifications and verification

ISO 2768-2:1989  ISO

Status: In force / 1989-11-02

General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications

054924 ISO/TC 213 - Dimensional and geometrical product specifications and verification

ISO 14405-1:2016  ISO

Status: In force / 2016-08-04

Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes

054924 ISO/TC 213 - Dimensional and geometrical product specifications and verification

ISO 8062-4:2017  ISO

Status: In force / 2017-07-31

Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 4: General tolerances for castings using profile tolerancing in a general datum system

054924 ISO/TC 213 - Dimensional and geometrical product specifications and verification

ISO 8062-3:2007  ISO

Status: In force / 2007-05-31

Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings

054924 ISO/TC 213 - Dimensional and geometrical product specifications and verification

ISO 1938-2:2017  ISO

Status: In force / 2017-01-11

Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges

054924 ISO/TC 213 - Dimensional and geometrical product specifications and verification

ISO 1938-1:2015  ISO

Status: In force / 2015-10-26

Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size

054924 ISO/TC 213 - Dimensional and geometrical product specifications and verification

ISO 1101:2017  ISO

Status: In force / 2017-02-01

Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out

054924 ISO/TC 213 - Dimensional and geometrical product specifications and verification

ISO 8062-1:2007  ISO

Status: In force / 2007-05-31

Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 1: Vocabulary

054924 ISO/TC 213 - Dimensional and geometrical product specifications and verification

ISO 13920:1996  ISO

Status: In force / 1996-08-01

Welding — General tolerances for welded constructions — Dimensions for lengths and angles — Shape and position

048650 ISO/TC 44/SC 10 - Quality management in the field of welding

ISO/TS 8062-2:2013  ISO

Status: In force / 2013-06-19

Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules

054924 ISO/TC 213 - Dimensional and geometrical product specifications and verification

ISO 5459:2011  ISO

Status: In force / 2011-08-10

Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems

054924 ISO/TC 213 - Dimensional and geometrical product specifications and verification

ISO 14405-2:2018  ISO

Status: In force / 2018-12-14

Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear or angular sizes

054924 ISO/TC 213 - Dimensional and geometrical product specifications and verification

ISO 14405-3:2016  ISO

Status: In force / 2016-12-13

Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes

054924 ISO/TC 213 - Dimensional and geometrical product specifications and verification

ISO 5458:2018  ISO

Status: In force / 2018-05-24

Geometrical product specifications (GPS) — Geometrical tolerancing — Pattern and combined geometrical specification

054924 ISO/TC 213 - Dimensional and geometrical product specifications and verification

ISO 286-2:2010  ISO

Status: In force / 2010-06-07

Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

054924 ISO/TC 213 - Dimensional and geometrical product specifications and verification

ISO 286-1:2010  ISO

Status: In force / 2010-04-16

Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits

054924 ISO/TC 213 - Dimensional and geometrical product specifications and verification

PNE-EN ISO 14405-2  PROY

Status: Procedure

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)

CTN 82/SC 2 DIMENSIONAL METROLOGY

PNE-prEN ISO 8062-3  PROY

Status: Procedure

Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO/DIS 8062-3:2019)

CTN 78 FOUNDRY INDUSTRIES

UNE-EN ISO 14253-1:2013  UNE

Status: Cancelled / 2015-06-17

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specification (ISO 14253-1:2013) (Endorsed by AENOR in January of 2015.)

CTN 82/SC 2 DIMENSIONAL METROLOGY

UNE-EN ISO 14253-1:1999  UNE

Status: Cancelled / 2015-01-01

GEOMETRICAL PRODUCT SPECIFICATIONS (GPS). INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT. PART 1: DECISION RULES FOR PROVING CONFORMANCE OR NON-CONFORMANCE WITH SPECIFICATIONS (ISO 14253-1:1998)

CTN 82/SC 2 DIMENSIONAL METROLOGY

UNE-EN ISO 1101:2006  UNE

Status: Cancelled / 2013-04-01

Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004)

CTN 82/SC 2 DIMENSIONAL METROLOGY

UNE-EN ISO 14660-1:2000  UNE

Status: Cancelled / 2012-12-13

GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES- PART 1: GENERAL TERMS AND DEFINITIONS. (ISO 14660-1:1999)

CTN 82/SC 2 DIMENSIONAL METROLOGY

UNE-EN 20286-2:1996  UNE

Status: Cancelled / 2011-03-02

ISO SYSTEM OF LIMITS AND FITS. PART 2: TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS. (ISO 286-2:1988).

CTN 82/SC 1 GENERAL METROLOGY

UNE-EN 20286-1:1996  UNE

Status: Cancelled / 2011-02-23

ISO SYSTEM OF LIMITS AND FITS. PART 1: BASES OF TOLERANCES, DESVIATIONS AND FITS. (ISO 286-1:1988).

CTN 82/SC 1 GENERAL METROLOGY

UNE 4026:1979  UNE

Status: Cancelled / 1996-07-11

TOLERANCES OF DIMENSIONS. VOCABULARY.

CTN 82 METROLOGY AND CALIBRATION

UNE 4027:1955  UNE

Status: Cancelled / 1996-07-11

FLOATING FITS. CONCEPTS, DENOMINATIONS, DEFINITIONS AND NOTATION.

CTN 82 METROLOGY AND CALIBRATION

UNE 4028:1955  UNE

Status: Cancelled / 1996-07-11

FIXED FITS. CONCEPTS, DENOMINATIONS, DEFINITIONS AND NOTATION.

CTN 82 METROLOGY AND CALIBRATION

UNE 4040:1981  UNE

Status: Cancelled / 1996-07-11

TOLERANCES OF PLAIN WORKPIECES, UNTIL 500 MM. ISO SYSTEM.

CTN 82 METROLOGY AND CALIBRATION

UNE-EN ISO 14405-2:2011  UNE

Status: Cancelled / 2015-06-17

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) (Endorsed by AENOR in July of 2012.)

CTN 82/SC 2 DIMENSIONAL METROLOGY

UNE-CR ISO 14638:2005  UNE

Status: Cancelled / 2015-03-01

Geometrical product specification (GPS). Masterplan. (ISO/TR 14638:1995)

CTN 82/SC 2 DIMENSIONAL METROLOGY

ISO 14405-2:2011  ISO

Status: Cancelled / 2018-12-14

Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes

054924 ISO/TC 213 - Dimensional and geometrical product specifications and verification

ISO 5458:1998  ISO

Status: Cancelled / 2018-05-24

Geometrical Product Specifications (GPS) — Geometrical tolerancing — Positional tolerancing

054924 ISO/TC 213 - Dimensional and geometrical product specifications and verification

Number of results 68