Skip main navigation
You are at: Home>Certification>Product certification>N mark>Civil works products and facilities>N Mark for Polyethylene (PE) piping and composites for the supply of gas
N Mark for Polyethylene (PE) piping and composites for the supply of gas
N Mark of quality for polyethylene PE tubes and composites for the gas supply system

N Mark for Polyethylene (PE) piping and composites for the supply of gas

N Mark for Polyethylene (PE) piping and composites for the supply of gas

The N Mark for Polyethylene (PE) piping and composites for the supply of gas certifies that these products comply with national and European standards

AENOR product certification is an essential tool for increasing product quality. It provides the consumer with greater confidence in the product, improves sales and facilitates insertion into new markets

The N Mark covers the following products:

  • Polyethylene (PE) piping for the supply of gaseous fuels in accordance with the standard UNE-EN 1555-2
  • Polyethylene composite for the manufacture of tubes for the supply of gaseous fuels in accordance with the standard UNE-EN 1555-1
  • Multilayer pipe systems for gas installation pipework with a maximum operating pressure up to and including 5 bar in accordance with the standard UNE 53008 and/or ISO 17484

As a compliance assessor, AENOR is a leading product certification entity. With over 100,000 certified references, The AENOR N Mark, present in more than 40 countries, is one of the five most widely-used product quality marks in the world.

AENOR's N Mark is voluntary and enables companies to demonstrate that their products comply with the service provision requirements of UNE, EN and ISO standards or technical specifications. This demonstration of compliance during the manufacturing and testing of the final products, based on a rigorous control performed by AENOR, will allow licensees of the Mark to put their products on the market with a high standard of quality, instilling confidence in the users of these certified products.

This way, the AENOR N Mark can provide the following advantages:

The manufacturer

  • Affords greater knowledge of the product via the exhaustive control set forth by the N​ Mark
  • Products that do not comply with relevant standards or regulations can be detected before they enter the market
  • Lowers the production costs since there is greater control during the manufacturing process.
  • There are commercial grounds to introduce the product into new markets and facilitate access to works

Business providers and monitoring agents

  • Guarantees that the product has undergone prior verification to determine its compliance with minimum requirements
  • Products with long-lasting confidence. Product assessments are ongoing, guaranteeing compliance with the initial certified provisions
​ ​

Public Administrations

  • ​​Guarantees that the prescribed product will comply with the applicable statutory requirements
  • Transparency of the AENOR certification process.
  • Strikes a balance among interested parties with regard to decisions on the certified products

The end user

  • Confidence from knowing that the product has undergone prior verification
  • Credibility, the product is assessed by a recognised certification body​


The AENOR Mark is voluntary. Companies that want AENOR to certify their product must submit their application in accordance with the formats established by AENOR. This application must include information about the company and the characteristics of the products for which certification is sought.

Once AENOR technical staff have analysed the documents, compliance assessment activities will be performed in order to verify that the products comply with the applicable standards:


A visit is made to the production centre to carry out the following procedures:

  • a) the quality management system is audited in accordance with the UNE-EN ISO 9001 requirements that are directly related to the production process.
  • b) The manufacturer's manufacturing process and production controls are inspected to ensure the product complies with the requirements of the standard.
  • c) Samples are taken and sent to an accredited laboratory, which performs the tests included in the standards. The manufacturer sends samples identified by the auditor to the laboratory.


The laboratory carries out the tests of the standard and send a report to AENOR.


Using all the information on the activities performed, the Plastics Certification Technical Committee (an independent body established by all the interested parties: manufacturers, the Administration, users, monitoring entities and AENOR) will either propose to AENOR that the Mark be granted, or request that one of the activities be repeated due to non-compliance.

Once the Certificate has been granted, the process will continue as the monitoring activities required to keep it must be performed. Samples will be taken, and audits, inspections and tests will be performed on an annual basis. The result is assessed every year by the Plastics Certification Technical Committee, which decides whether or not to uphold the Mark

Once the certification process has been successfully completed, the organisation obtains: ​ ​

  • AENOR product certificate
  • User licence for the AEN​​OR ​Mark of a certified product, in accordance with the provisions of AENOR regulations
AENOR N Mark logo for a certified product​​​​​​

Top searches

CTC Committee 001 for Certified Plastic

GlobalEPD Declarations

Environmental product declarations (EPD)

​​​​AENOR manages the GlobalEPD Programme of verification, in accordance with Standards ISO 14025 and ​EN 15804